Electrical Services In Encino, CA

If your house was built before about 1950 and has never been fully rewired, it's a genuine possibility — and Encino has a lot of housing from that period, particularly south of Ventura Boulevard. The usual giveaways are two-prong ungrounded outlets, ceramic knobs visible on joists in the attic, and cloth-covered cable. It often surfaces during an insurance review or a remodel. We can confirm it in an attic and box inspection rather than guessing from the build year.

Rewiring is priced by scope, not by a flat figure. Square footage, circuit count, single versus two storey, attic and crawlspace access, and lath-and-plaster versus drywall all change the number — and older Encino homes with plaster walls generally need more access points than newer construction. Not every property needs a full rewire either. We assess on site and give you a written scope and price, and that visit is free.

Because it was almost certainly enough when the house was built. A 1940s or 1950s Encino home was wired for a fraction of today's load — no central air conditioning, no pool equipment, no home office and certainly no EV charger. Some older properties here are still on 60 amps. The service wasn't undersized then; it has simply been outgrown, which is why a 200-amp upgrade is one of the most common jobs we do in this part of the Valley.

ADI lists a 200-amp electrical panel upgrade at $1,949 in its online shop, covering a standard residential swap. On older Encino properties the price more often moves, because the meter socket, service mast and service entrance conductors frequently need replacing too, and the grounding electrode system usually has to be brought up to current code. LADBS permit fees and LADWP disconnect coordination also factor in. You get a firm written number after the on-site assessment.

For anything beyond swapping a fixture or a device, yes. Encino is part of the City of Los Angeles, so permits go through the Los Angeles Department of Building and Safety, and service work also involves LADWP scheduling for the disconnect and reconnect. That's different from the neighbouring incorporated cities, which run their own building departments. Unpermitted electrical work reliably surfaces during a home sale. We file the permit and see the job through inspection.

The two things that drive it are distance from the panel and whether your service has any capacity left. In Encino the second one decides most jobs, because a lot of homes here are still on 100 amps with air conditioning and a pool already connected. Where there's headroom, a garage-wall install near the panel is straightforward. Where there isn't, the honest answer is that you need a service upgrade first — and we'll tell you that before you buy a charger.

Yes. The Ventura Boulevard corridor through Encino is largely offices, medical and dental suites, and retail, and we handle lighting retrofits, added circuits, panel and subpanel work, tenant improvement fit-outs and commercial EV charging. Medical and dental suites usually need dedicated circuits for equipment and work scheduled around patient hours. Tell us the suite type and the hours you can give us, and we'll build the schedule around that.

We cover all of Encino (91316 and 91436), including South of the Boulevard, Amestoy Estates, Royal Oaks, Encino Village, Rancho Estates and the Encino Hills, plus the Ventura Boulevard commercial corridor. We also serve neighbouring Tarzana, Sherman Oaks, Reseda and Woodland Hills, where we're based. Coverage is subject to scheduling and the type of work requested.